LAUNCH X431 and CRP Solutions for Firmware(V12.12) FIX Failure

For CRP Series:

If the Firmware FIX fails, please first download the firmware from the Upgrade and then try fixing the firmware again.

1. Connect to the network and go to the Update.
2. Select the firmware (V12.12) file that needs to be re-downloaded, and click Update to download it again.

3. On the main interface, click DATA, then go to Firmware Fix, and execute Firmware Fix.

For the X431 scanner:

If you try to update key programming software and firmware on Launch X431 IMMO Plus/ Elite/ PAD V/ PAD VII,

you must connect this key programmer with tablet, otherwise, it will give an error device no response.
This kit is designed to avoid the problems below.

Firmware update on the IMMO PLUS