LAUNCH X431 PRO3 V+ ELITE: TPMS Calibration on Trumpchi GS4 PLUS

The LAUNCH X431 diagnostic tool can perform a simple sensor ID calibration function when replacing tire pressure sensors (if performing functions such as tire pressure monitoring, a TPMS tool such as i-TPMS or CRT5011 V2 is  still required). This article will describe how to perform tire pressure sensor ID calibration on a 2022 Trumpchi GS4 PLUS using the LAUNCH X431 PRO3 V+ ELITE.

Function Description:

This function is used for the following situations on the Trumpchi GS4 PLUS 2022:

1. The diagnostic device detects: DTCs.related to TPMS sensor faults and uncalibrated tire pressures.

2. Rematching TPMS sensors after tire replacement, etc.

 

Tested Model

2022 – Trumpchi – GS4 PLUS

Supported equipment:

X431 PRO cable connection scanner
Launch X431 Pro Elite (Same as X431 PROS Elite)
LAUNCH X431 Pro Star

X431 Pro 8-inch Series Bluetooth scanner
LAUNCH X431 PRO TT/ PRO Dyno
LAUNCH X431 PROS V5.0
Launch X431 V V5.0

X431 Pro 10-inch Series Bluetooth scanner
Launch X431 V+ V5.0
Launch Pro3S+ V5.0
Launch X431 PRO3 APEX
Launch X431 Pro3 ACE
LAUNCH X431 PRO3 V+ 5.0 Elite (Same as PRO3S+ Elite)
Launch X431 Pro5 Smartlink

X431 PAD Series
Launch X431 PAD V Elite
Launch X431 PAD VII Elite

Execution Conditions:

– Connector connected, ignition switch ON, engine OFF.

– Diagnostic tool connected to the network.

 

Operation Procedure:

1) Choose [Local Diagnose] [TRUMPCHI]. TRUMPCHI diagnostic software version V13.00 or higher is recommended.

 

2) We will manually select the vehicle model. Click in sequence: [Manually Select]–[SUV]–[GS4 PLUS 2022]

 

3) In the topology diagram interface, select [BCM] and click [ENTER] to enter the function menu.

 

4) Choose [Special Function] –[TPMS Calibration]. If the conditions are met, click [OK]

 

5) The LAUNCH X431 diagnostic tool will display the currently recorded sensor IDs; click [OK]

 

6) Enter the sensor IDs to be rematched, and then click [OK] . The system will display the new sensor ID numbers; after verifying their correctness, click [OK].

 

 

www.x431tool.com

Contact:
Email: sales@x431tool.com
WhatsApp: +86 18186426016